* Got anvil-manage-install-target finished creating config files and enabling daemons needed for PXE. Still untested in function though.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Storage->read_file() where the last newline wasn't always being faithfully recorded.
* Created System->restart_daemon (as opposed to ->reload_daemon).
* Got creating/updating dhcpd.conf / dhcpd working in tools/anvil-manage-install-target.
Signed-off-by: Digimer <digimer@alteeve.ca>
* After much time wasted chasing a dnf bug (https://bugzilla.redhat.com/show_bug.cgi?id=1641947), tools/anvil-manage-install-target now populates the <DOCROOT>/<os_type>/<os_arch>/os/Packages/ directory with needed RPMs.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'sys::database::failed_connection_log_level' to allow silencing of log messages when a Striker peer database is not available.
* Started updating the .spec for the new release to add supported packages needed for PXE/dhcp/tftpboot.
* Added to repo tftpboot files as pulling them out of the packages and moving them into the right place relative to the modest size of adding them directly to our source wasn't justified.
* Created the still very very early 'tools/anvil-manage-firewall' tool.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Jobs->update_progress to take 'picked_up_by' as an optional parameter, defaulting to '$$' (the caller's PID).
* Created System->get_uptime() to return the current uptime in seconds.
* Added a delay to anvil-manage-power to not proceed with a reboot if the uptime is less than 600 seconds. This way, if any future bug causes an infinite reboot, there will be more time to determine what's wrong and debug the system between reboots.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up some logging.
* Made the "Reload" buttons work more sensibly and cleaned up some webui display stuff.
* Got deleting peers mostly working (well, it works, but then it goes into a loop thinking it needs to resync the now-gone database until the daemon restarts).
* Fixed a race condition bug where if a job exited between the time that anvil-daemon got a list of PIDs and when it checked to see if that specific pid was alive, a job that actually completed could be restarted.
* Added a loop check to anvil-manage-striker-peers where it would hold until a database connection to the newly added peer was available, preventing a condition where re-adding a peer (and so the host_uuid is in hosts) cause the job belonging to the peer to be recorded locally and then never synced to the peer.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'sys::log_date' which controls if the date and time is pre-pended to log entries.
* Created Get->host_name() which takes a host UUID and returns the 'host_name' from the 'hosts' table, if found.
* Cleaned up some HTML templates and logging.
Signed-off-by: Digimer <digimer@alteeve.ca>
The resync of the databases was originally designed (on m2) with the expextation that any given column would have only one change per 'modified_date' time. That was never a great approach, but it worked in m2 and just bit me on m3. With job processing, for an example, the job_progress will change repeatedly in one pass, all with the same 'modified_date'. So only one record per run would resync. To fix this, the plan is to drop 'history_id' (and the procedure/trigger in pgsql to copy INSERT and UPDATEs to the history schema). The new plan is to use 'change_uuid' with a per-transaction UUID created in Database so that the per-DB 'history_id' is replaced with a per-update/insert UUID in 'change_uuid'. This will become the unique record used to sync databases, instead or 'modified_date'. To keep things consistent, 'modified_date' was renamed to 'change_date' to match 'change_uuid'. This work is very much "in progress" and not finished.
This commit also changes Get->uuid to use UUID::Tiny to create v4 UUIDs instead of making making a system call to 'uuidgen'. This sped up UUID generation by almost 100x.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the Database module to not sort or reorder the 'core_tables' array, and reordered them in the hash they're declared in.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a check to all 'Database->insert_or_update_*' methods to check if the passed-in reference UUID was found and return an empty string if not.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_jobs() to also use the job_command when looking for an existing job (when a specific job_uuid was not included).
* Fixed a bug with a missing ? in striker->add_sync_peer function. Also updated it to not try to record the peer's job as it is unlikely the peer will be in hosts. Instead, the job_command to add the peer is appended to the local job't job_data and the updated anvil-manage-striker-peers looks for that at the end of the add and sync, and records the job once the peer's UUID is in 'hosts'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Bumped the RPM spec file to 15, though haven't actually rolled the new RPM yet. Also added 'htop' as an anvil-core dependencies.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-configure-striker to use Job methods and reboot using anvil-manage-power. Also updated it to set/clear maintenance mode and mark a reboot required at the end of it's run just prior to reboot.
* Lots of log cleanup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Job->clear() to clear the job_picked_up_by column. Created Job->get_job_uuid() to return the job_uuid of an unfinished job matching a given job_command string (if any found).
* Updated striker->process_power to log the user out after confirming a poweroff or reboot action.
* Added anvil-daemon --startup-only to not enter the main loop and exit.
* Finished getting poweroff and reboot working (though more testing needed).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got the webui portion of requesting a poweroff and reboot done, but still working on finishing anvil-manage-power (work on which lead to the above improvement).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created the Anvil::Tools::Jobs module to handle general job processing task. Moved 'update_progress' from tools/anvil-update-system to it and generalized it.
* Added some missing CDATA wrappers to the words XML file strings with '>' in it.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added '--refresh-json' to anvil-daemon that auto-selects '--run-once', '--main-loop-only' and '--no-start'.
* Updated anvil-update-system to not go more than a second between updates to the progress (save for when we're holding on data from 'dnf').
Signed-off-by: Digimer <digimer@alteeve.ca>
* Made it so that anvil-daemon won't restart when on-disk version has changed while jobs are still running.
* Made it so that anvil-update-system reloads systemctl after the update finishes to pickup changes in updated system daemons.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished (for now) adding support for monitoring jobs while a node is in maintenance mode!
* Cleaned up the display of job data and redid how buttons (real and classed links) are displayed to be consistent.
* Fixed a bug in anvil-daemon where a disconnect wasn't being called between loops, causing DB connections to pile up.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-update-system. to set and then clear maintenance mode.
* Added the files needed for jquery-ui v1.12.1
* Added unused and xcf format icons to the alteeve skin.
* Disabled all 'postun' scriptlets in anvil.spec.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started adding the display of running and recently finished jobs to Striker when in maintenance mode. Still lots to do.
* Started working on the logic for what will soon be Words->decypher_string in anvil-daemon to process strings stored as '<key>,!!<name1>!<value1>!!,...,!!<nameN>!<valueN>!!'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed 'database::locking' to 'sys::database::locking' to avoid collisions with 'database' keys.
* Fixed a problem with System->call where reidrects were missing the Proc::Simple method name.
* Updated anvil-daemon to check if there is no database connections on start-up, run prep-database if not, and try connecting again. If it still fails, exit. Also updated the main loop to reconnect to the database(s) and skip if non are available. Did more work on the keep_running() function.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed tools/anvil-clear-reboot to tools/anvil-reboot-needed and changed it to behave like anvil-maintenance-mode.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created tools/anvil-clear-reboot to clear the "reboot needed" flag. Also created, but not yet using (and may not use) units/anvil-boot-time.service.
* Started work on having jobs show their data via JSON / jquery.
* Updated anvil-update-system to record messages indicating the progress so far.
Signed-off-by: Digimer <digimer@alteeve.ca>
Digimer