diff --git a/Anvil/Tools/Server.pm b/Anvil/Tools/Server.pm
index 3bf56862..97d9a189 100644
--- a/Anvil/Tools/Server.pm
+++ b/Anvil/Tools/Server.pm
@@ -864,37 +864,6 @@ sub map_network
 	return(0);
 }
 
-=head2 provision
-
-This method creates a new (virtual) server on an Anvil! system.
-
-Parameters;
-
-=cut
-sub provision
-{
-	my $self      = shift;
-	my $parameter = shift;
-	my $anvil     = $self->parent;
-	my $debug     = defined $parameter->{debug} ? $parameter->{debug} : 3;
-	$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "Server->provision()" }});
-	
-=cut
-Provision order:
-
-1. Create LVs and register the storage. 
-  - NOTE: If the LV is already in the DB (from a past install) and the peer is not available and the local 
-          DRBD resource doesn't show Consistent, abort. If the peer is alive but we can't contact it, it's 
-          possible the peer is UpToDate.
-2. Create the DRBD resource. If "Inconsistent" on both nodes, force up to date
-3. Wait for install media/image to be ready
-4. Provision VM and add to Pacemaker.
-
-=cut
-	
-	
-	return(0);
-}
 
 =head2 migrate_virsh
 
@@ -918,9 +887,9 @@ This is the host name (or IP) of the host that we're pulling the server from.
 
 If set, the server will be pulled.
 
-=head3 target (optional, defaukt is the full local host name)
+=head3 target (optional, default is the full local host name)
 
-This is the host name (or IP) Of the host that the server will be pushed to, if C<< source >> is not set. When this is not passed, the local full host name is used as default.
+This is the host name (or IP) of the host that the server will be pushed to, if C<< source >> is not set. When this is not passed, the local full host name is used as default.
 
 =cut
 sub migrate_virsh
diff --git a/notes b/notes
index 604d9fc3..5af42d87 100644
--- a/notes
+++ b/notes
@@ -6,7 +6,7 @@ TODO:
 - host_health is a duplicate of 'health'
 
 ============
-
+ 
 # Dump
 su - postgres -c "pg_dump anvil > /var/lib/pgsql/anvil.out"
 su - postgres -c "pg_dump --schema-only anvil > /var/lib/pgsql/anvil_schema.out"
diff --git a/ocf/alteeve/server b/ocf/alteeve/server
index 917df7bb..7f63d952 100755
--- a/ocf/alteeve/server
+++ b/ocf/alteeve/server
@@ -1260,6 +1260,35 @@ sub migrate_server
 		target_host => $target, 
 	}});
 	
+	# If there is a '<target>.mnX' (migration network X) entry that can be resolved, we'll change the 
+	# target to use that. This is a dedicated, usually back-to-back network used in nodes specifically
+	# for migration.
+	my $test_target =  $target;
+	   $test_target =~ s/\..*$//;
+	   $test_target .= "mn1";	# Might want to make this a loop to support MN2+ later
+	my $test_ip     =  $anvil->Convert->host_name_to_ip({debug => 2, host_name => $test_target});
+	$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { 
+		test_target => $test_target, 
+		test_ip     => $test_ip, 
+	}});
+	if ($test_ip)
+	{
+		# Can we access the peer with this?
+		my ($access) = $anvil->Remote->test_access({debug => 3, target => $test_ip});
+		$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { access => $access }});
+		
+		# Did we get access?
+		if ($access)
+		{
+			# Yup! Switch the target.
+			$target = $test_ip;
+			$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0663", variables => { 
+				target => $test_target,
+				ip     => $target,
+			}});
+		}
+	}
+	
 	# Before migrating, make sure the daemons are running on the peer.
 	check_daemons($anvil, "start");
 	
@@ -1422,7 +1451,7 @@ sub migrate_server
 			debug  => 2, 
 			server => $server, 
 			source => $source, 
-			target => $target 
+			target => $target, 
 		});
 		$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { migrated => $migrated }});
 	}
diff --git a/share/words.xml b/share/words.xml
index 0fd2c4b4..4ec2d18d 100644
--- a/share/words.xml
+++ b/share/words.xml
@@ -2053,6 +2053,7 @@ The file: [#!variable!file!#] needs to be updated. The difference is:
 		<key name="log_0660">Stopped the postgresql daemon as a peer is currently primary.</key>
 		<key name="log_0661">Our most recent database dump is newer than any from our peers. As such, we'll just start the database without a load.</key>
 		<key name="log_0662">Retrying to connect to the database.</key>
+		<key name="log_0663">The target can be reached on the dedicated migration network: [#!variable!target!#] via the IP address: [#!variable!ip!#], switching to use that for the RAM copy.</key>
 		
 		<!-- Messages for users (less technical than log entries), though sometimes used for logs, too. -->
 		<key name="message_0001">The host name: [#!variable!target!#] does not resolve to an IP address.</key>
diff --git a/tools/anvil-manage-dr b/tools/anvil-manage-dr
index 77d51519..3d6f3143 100755
--- a/tools/anvil-manage-dr
+++ b/tools/anvil-manage-dr
@@ -5,6 +5,8 @@
 # NOTE: Unlike most jobs, this one will directly work on the peer node and the DR host using SSH connections.
 #       This behaviour is likely to change later as it's not ideal.
 # 
+# TODO: --remove is not yet implemented, this needs to be done. Use anvil-delete-server for methods to delete.
+# 
 # Exit codes;
 # 0 = Normal exit.
 # 1 = Any problem that causes an early exit.
@@ -85,8 +87,6 @@ if (not $anvil->data->{switches}{'job-uuid'})
 
 sanity_check($anvil, $terminal);
 
-do_task($anvil, $terminal);
-
 
 $anvil->nice_exit({exit_code => 0});
 
@@ -95,19 +95,6 @@ $anvil->nice_exit({exit_code => 0});
 # Functions                                                                                                 #
 #############################################################################################################
 
-sub do_task
-{
-	my ($anvil, $terminal) = @_;
-	
-	# What task am I doing?
-	if ($anvil->data->{switches}{protect})
-	{
-		
-	}
-	
-	return(0);
-}
-
 sub sanity_check
 {
 	my ($anvil, $terminal) = @_;