<!-- Messages for users (less technical than log entries), though sometimes used for logs, too. -->
<keyname="message_0001">The host name: [#!variable!target!#] does not resolve to an IP address.</key>
<keyname="message_0002">The connection to: [#!variable!target!#] on port: [#!variable!port!#] as the user: [#!variable!user!#] was refused. If you recently booted the target, it may be just about finished booting. It is normal for the connection to be refused for a brief time during the boot process.</key>
<keyname="message_0003">There is no route to: [#!variable!target!#]. Is the machine in the process of booting up or powering off?</key>
<keyname="message_0004">Timed out while waiting for a reply from: [#!variable!target!#]. Is the machine booting up? If so, please wait a minute or two and try again.</key>
<keyname="message_0005">There was an unknown error while connecting to: [#!variable!target!#]. The error was: [#!variable!error!#]</key>
<keyname="message_0006">We were unable to log in to: [#!variable!target!#]. Please check that the password is correct or that passwordless SSH is configured properly.</key>
<keyname="message_0007">An SSH session was successfully opened to: [#!variable!target!#].</key>
<keyname="message_0008">There was a problem establishing an SSH channel to the target: [#!variable!target!#] for shell call: [#!variable!shell_call!#]</key>
<keyname="message_0009">The SSH session to: [#!variable!target!#] was successfully closed.</key>
<keyname="message_0010">The SSH session to: [#!variable!target!#] was closed because 'no_cache' was set and there was an open SSH connection.</key>
<keyname="log_0020"><![CDATA[[ Error ] - The method: [#!variable!method!#] was called but the: [#!variable!parameter!#] parameter was not passed or it is empty.]]></key>
<keyname="log_0021"><![CDATA[[ Error ] - The method Storage->read_file() was asked to read the file: [#!variable!file!#], but that file does not exist.]]></key>
<keyname="log_0022"><![CDATA[[ Error ] - The method Storage->read_file() was asked to read the file: [#!variable!file!#] which exists but can't be read.]]></key>
<keyname="log_0024"><![CDATA[[ Error ] - No template file passed to Template->get().]]></key>
<keyname="log_0025"><![CDATA[[ Error ] - No requested template file: [#!variable!source!#] does not exist. Is it missing in the active skin?]]></key>
<keyname="log_0026"><![CDATA[[ Error ] - The requested template file: [#!variable!source!#] is not readable. Please check that it is readable by the webserver user: [#!variable!user_name!#]]]></key>
<keyname="log_0027"><![CDATA[[ Error ] - No template name passed to Template->get().]]></key>
<keyname="log_0028">Successfully read the words file: [#!variable!file!#].</key>
<keyname="log_0029"><![CDATA[[ Error ] - Storage->find() failed to find: [#!variable!file!#].]]></key>
<keyname="log_0030"><![CDATA[[ Warning ] - Template->skin() was asked to set the skin: [#!variable!set!#], but the source directory: [#!variable!skin_directory!#] doesn't exist. Ignoring.]]></key>
<keyname="log_0031"><![CDATA[[ Warning ] - Storage->search_directories() was passed the array: [#!variable!array!#], but it wasn't actually an array. Using @INC + path::directories::tools + \$ENV{'PATH'} for the list of directories to search instead.]]></key>
<keyname="log_0032"><![CDATA[[ Warning ] - Words->read()' called without a file name to read.]]></key>
<keyname="log_0033"><![CDATA[[ Warning ] - Words->read()' asked to read: [#!variable!file!#] which was not found.]]></key>
<keyname="log_0034"><![CDATA[[ Warning ] - AN::Tools::Words->read()' asked to read: [#!variable!file!#] which was not readable by: [#!variable!user!#] (uid/euid: [#!variable!uid!#]).]]></key>
<keyname="log_0035"><![CDATA[[ Warning ] - The config file: [#!variable!file!#] appears to have a malformed line: [#!variable!count!#:#!variable!line!#].]]></key>
<keyname="log_0036"><![CDATA[[ Error ] - The method Database->read_variable() was called but both the 'variable_name' and 'variable_uuid' parameters were not passed or both were empty.]]></key>
<keyname="log_0037"><![CDATA[[ Error ] - The method Database->insert_or_update_variables() method was called but both the 'variable_name' and 'variable_uuid' parameters were not passed or both were empty.]]></key>
<keyname="log_0038"><![CDATA[[ Error ] - The method Storage->change_mode() was called without an invalid 'mode' parameter. It should have been three or four digits, but: [#!variable!mode!#] was passed.]]></key>
<keyname="log_0040"><![CDATA[[ Error ] - The method Storage->write_file() was asked to write the file: [#!variable!file!#] but it already exists and 'overwrite' was not set. Aborting.]]></key>
<keyname="log_0041"><![CDATA[[ Error ] - The method Storage->write_file() was asked to write the file: [#!variable!file!#] but it is not a full path. Aborting.]]></key>
<keyname="log_0042"><![CDATA[[ Error ] - The method Words->string() was asked to process the string: [#!variable!string!#] which has insertion variables, but nothing was passed to the 'variables' parameter.]]></key>
<keyname="log_0043"><![CDATA[[ Error ] - The method System->call() was called but 'shell_call' was not passed or was empty.]]></key>
<keyname="log_0046"><![CDATA[[ Note ] - The method Storage->copy_file() was asked to copy: [#!variable!source!#] to: [#!variable!target!#], but the target already exists and 'overwrite' wasn't specified, skipping.]]></key>
<keyname="log_0047"><![CDATA[[ Error ] - The method Log->level() was passed an invalid log level: [#!variable!set!#]. Only '0', '1', '2', '3' or '4' are valid.]]></key>
<keyname="log_0050">[ Error ] - There is a local database defined, but it does not appear to exist and we could not initialize the database server. Is 'postgresql-server' installed?</key>
<keyname="log_0051"><![CDATA[[ Error ] - The method Storage->change_owner() was asked to change the ownership of: [#!variable!target!#] which doesn't exist.]]></key>
<keyname="log_0052"><![CDATA[[ Error ] - The method Storage->copy_file() was called but the source file: [#!variable!source!#] doesn't exist.]]></key>
<keyname="log_0053"><![CDATA[[ Error ] - The 'Database->connect()' method tried to connect to the same database twice: [#!variable!target!#].]]></key>
<keyname="log_0054">
Connecting to Database with configuration ID: [#!variable!id!#]
<keyname="log_0058"><![CDATA[[ Error ] - The method System->remote_call() was called but the port: [#!variable!port!#] is invalid. It must be a digit between '1' and '65535'.]]></key>
<keyname="log_0061"><![CDATA[[ Error ] - The method Get->users_home() was asked to find the home directory for the user: [#!variable!user!#], but was unable to do so.]]></key>
<keyname="log_0062">SSH session opened without a password to: [#!variable!target!#].</key>
<keyname="log_0063">The database: [#!variable!host!# -> #!variable!name!#] with the ID: [#!variable!id!#] did not respond to pings and 'database::#!variable!id!#::ping_before_connect' is not set to '0' in '#!data!path::configs::striker.conf!#', skipping it.</key>
<keyname="log_0064">[ Warning ] - The database: [#!variable!name!#] on host: [#!variable!host!#] with ID: [#!variable!id!#] can not be used, skipping it.</key>
<keyname="log_0065">
The database connection error was:
----------
#!variable!dbi_error!#
----------
</key>
<keyname="log_0066">Is the database server running on: [#!variable!target!#] and does the target's firewall allow connections on TCP port: [#!variable!port!#]?</key>
<keyname="log_0067"><![CDATA[The password was not passed, and it is required. Please set: [database::#!variable!id!#::password = <password>] in: [#!data!path::configs::striker.conf!#].]]></key>
<keyname="log_0068"><![CDATA[The database user name: [#!variable!user!#] on the host: [#!variable!host!#] is either not the owner of the database: [#!variable!name!#], or the password for that user is incorrect.
<keyname="log_0069">The connection to the database: [#!variable!name!#] on host: [#!variable!host!#:#!variable!port!#] was refused. Is the database server running?</key>
<keyname="log_0070">The connection to the database: [#!variable!name!#] on host: [#!variable!host!#:#!variable!port!#] failed because the name could not be translated to an IP address. Is this database server's host name in '/etc/hosts'?</key>
<keyname="log_0071">Successfully Connected to the database: [#!variable!name!#] (id: [#!variable!id!#]) on host: [#!variable!host!#:#!variable!port!#].</key>
<keyname="log_0072"><![CDATA[[ Error ] - The method Database->query() was called without a database ID to query and 'sys::read_db_id' doesn't contain a database ID, either. Are any databases available?]]></key>
<keyname="log_0073"><![CDATA[[ Error ] - The method Database->query() was asked to query the database with ID: [#!variable!id!#] but there is no file handle open to the database. Was the connection lost?]]></key>
<keyname="log_0074">About to query: [#!variable!id!#]:[#!variable!query!#]</key>
<keyname="log_0075"><![CDATA[[ Error ] - Failed to prepare the database query: [#!variable!query!#] on: [#!variable!server!#]. The error was: [#!variable!db_error!#]. Note that if the query reports '--', the query was listed as containing sensitive data and '$an->Log->secure' is not set.]]></key>
<keyname="log_0076"><![CDATA[[ Error ] - Failed to execute the database query: [#!variable!query!#] on: [#!variable!server!#]. The error was: [#!variable!db_error!#]. Note that if the query reports '--', the query was listed as containing sensitive data and '$an->Log->secure' is not set.]]></key>
<keyname="log_0077"><![CDATA[[ Error ] - The method Database->initialize() was called without a database ID to query and 'sys::read_db_id' doesn't contain a database ID, either. Are any databases available?]]></key>
<keyname="log_0078"><![CDATA[[ Error ] - The method Database->initialize() was asked to query the database with ID: [#!variable!id!#] but there is no file handle open to the database. Was the connection lost?]]></key>
<keyname="log_0079"><![CDATA[[ Error ] - The method Database->initialize() was asked to initialize the database: [#!variable!server!#] (id: [#!variable!id!#]) but a core SQL file to load wasn't passed, and the 'database::#!variable!id!#::core_sql' variable isn't set. Unable to initialize without the core SQL file.]]></key>
<keyname="log_0080"><![CDATA[[ Error ] - The method Database->initialize() was asked to initialize the database: [#!variable!server!#] (id: [#!variable!id!#]) but the core SQL file: [#!variable!sql_file!#] doesn't exist.]]></key>
<keyname="log_0081"><![CDATA[[ Error ] - The method Database->initialize() was asked to initialize the database: [#!variable!server!#] (id: [#!variable!id!#]) but the core SQL file: [#!variable!sql_file!#] exist, but can't be read.]]></key>
<keyname="log_0082">The database: [#!variable!server!#] needs to be initialized using: [#!variable!sql_file!#].</key>
<keyname="log_0083"></key>
<keyname="log_0084"><![CDATA[[ Error ] - The method Database->query() was asked to query the database: [#!variable!server!#] but no query was given.]]></key>
<keyname="log_0085"><![CDATA[[ Error ] - The method Database->write() was asked to write to the database: [#!variable!server!#] but no query was given.]]></key>
<keyname="log_0087">Testing access to the the database: [#!variable!server!#] prior to query or write. Program will exit if it fails.</key>
<keyname="log_0088">Access confirmed.</key>
<keyname="log_0089"><![CDATA[[ Error ] - The method Database->write() was asked to write to the database with ID: [#!variable!id!#] but there is no file handle open to the database. Was the connection lost?]]></key>
<keyname="log_0090"><![CDATA[[ Error ] - Failed to 'do' the database query: [#!variable!query!#] on: [#!variable!server!#]. The error was: [#!variable!db_error!#]. Note that if the query reports '--', the query was listed as containing sensitive data and '$an->Log->secure' is not set.]]></key>
<keyname="log_0093"><![CDATA[[ Error ] - The method Alert->check_alert_sent() was called but the 'modified_date' parameter was not passed and/or 'sys::db_timestamp' is not set. Did the program fail to connect to any databases?]]></key>
<keyname="log_0097"><![CDATA[[ Error ] - The method Alert->check_alert_sent() was called but the 'set' parameter was not passed or it is empty. It should be 'set' or 'clear'.]]></key>
<keyname="log_0098">
[ Warning ] - Failed to set an alert because this host is not yet in the database. This can happen if the alert was set before this host was added to the database.
<keyname="log_0099">[ Error ] - There is no ScanCore database user set for the local machine. Please check: [#!data!path::config::striker.conf!#]'s DB entry: [#!variable!id!#].</key>
<keyname="log_0100">Database user: [#!variable!user!#] password has been set/updated.</key>
<keyname="log_0101"><![CDATA[[ Error ] - The method Alert->register_alert() was called but the 'title_key' parameter was not passed or it is empty and 'header' is enable (default).]]></key>
<keyname="log_0102">I am not recording the alert with message_key: [#!variable!message_key!#] to the database because its log level was lower than any recipients.</key>
<keyname="log_0103">The local machine's UUID was not read properly. It should be stored in: [#!data!sys::host_uuid!#] and contain hexadecimal characters in the format: '012345-6789-abcd-ef01-23456789abcd' and usually matches the output of 'dmidecode --string system-uuid'. If this file exists and if there is a string in the file, please verify that it is structured correctly.</key>
<keyname="log_0104">The database with ID: [#!variable!id!#] for: [#!variable!file!#] is behind.</key>
<keyname="log_0108"><![CDATA[[ Error ] - The method Database->insert_or_update_states() was called but the 'state_host_uuid' parameter was not passed or it is empty. Normally this is set to 'sys::data_uuid'.]]></key>
<keyname="log_0111">[ Warning ] - Failed to reload the Postgres server. Please check the system logs for details. The updated configuration is probably not active yet.</key>
<keyname="log_0112">Reloaded the PostgreSQL database server.</key>
<keyname="log_0113"><![CDATA[[ Note ] - The 'Database->configure_pgsql() method was called but the parent program is not running with root priviledges. Returning without doing anything.]]>.</key>
<keyname="log_0114"><![CDATA[The program: [#!data!path::exe::an-report-memory!#] must be called with '--program <name>', but no program name was read in.]]></key>
<keyname="log_0115">#!variable!program!# has started.</key>
<keyname="log_0116"><![CDATA[The method: [#!variable!method!#] was passed the parameter: [#!variable!parameter!#] with the value: [#!variable!value!#], which is invalid.]]></key>
<keyname="log_0117"><![CDATA[The method 'Convert->human_readable_to_bytes()' was passed the byte size: [#!variable!size!#] in the string: [sign: #!variable!sign!#, size: #!variable!size!#, type: #!variable!type!#] contains an illegal value. Sizes can only be integers or real numbers. It may also have commas in it which will be removed automatically.]]></key>
<keyname="log_0118"><![CDATA[The method 'Convert->human_readable_to_bytes()' was passed the byte size: [#!variable!size!#] in the string: [sign: #!variable!sign!#, size: #!variable!size!#, type: #!variable!type!#] appears to be a byte size already but the size does not seem to be an integer. Byte sizes can only be signed integers. It may also have commas in it which will be removed automatically.]]></key>
<keyname="log_0119"><![CDATA[The method 'Convert->human_readable_to_bytes()' method was called with the value: [#!variable!value!#] which we split into the size: [#!variable!size!#] and type: [#!variable!type!#]. The type appears to be invalid.]]></key>
<keyname="log_0120"><![CDATA[The method 'Convert->round()' was passed the number: [#!variable!number!#] which contains an illegal value. Only digits and one decimal place are allowed.]]></key>
<keyname="log_0121">Current memory used by: [#!variable!program_name!#] is approximately: [#!variable!bytes!#] bytes (#!variable!hr_size!#).</key>
<keyname="log_0122">The 'smaps' proc file for the process ID: [#!variable!pid!#] was not found. Did the program just close?</key>
<keyname="log_0123"><![CDATA[[ Error ] - Asked 'pgrep' to return the PIDs (process IDs) of the program: [#!variable!program!#] and a non-digit value was returned in: [#!variable!line!#]. This should not have happened.]]></key>
<keyname="log_0127">Firewalld was not running, re-enabling it. If you do not want this behaviour, please set 'sys::daemons::restart_firewalld = 0' in the configuration file for this program (or in 'tools.conf').</key>
<keyname="log_0128">Firewalld was not running, and 'sys::daemons::restart_firewalld = 0' is set. NOT starting it.</key>