;; SPDX-FileCopyrightText: 2023 Hilton Chain ;; ;; SPDX-License-Identifier: GPL-3.0-or-later (define-module (rosenthal services networking) #:use-module (srfi srfi-1) #:use-module (ice-9 match) #:use-module (guix gexp) #:use-module (guix records) #:use-module (gnu packages linux) #:use-module (gnu packages networking) #:use-module (gnu services) #:use-module (gnu services admin) #:use-module (gnu services configuration) #:use-module (gnu services dbus) #:use-module (gnu services shepherd) #:use-module (rosenthal packages binaries) #:export (iwd-configuration iwd-service-type tailscale-configuration tailscale-service-type)) ;; ;; iwd ;; (define %iwd-config-general '(enable-network-configuration? use-default-interface? address-randomization address-randomization-range roam-threshold roam-threshold-5g roam-retry-interval management-frame-protection control-port-over-nl80211? disable-anqp? disable-ocv? country)) (define %iwd-config-network '(enable-ipv6? name-resolving-service route-priority-offset)) (define %iwd-config-blacklist '(initial-timeout multiplier maximum-timeout)) (define %iwd-config-rank '(band-modifier-5ghz band-modifier-6ghz)) (define %iwd-config-scan '(disable-periodic-scan? initial-periodic-scan-interval maximum-periodic-scan-interval disable-roaming-scan?)) (define %iwd-config-ipv4 '(ap-address-pool)) (define %iwd-config-driver-quirks '(default-interface force-pae power-save-disable)) (define (uglify-field-name field-name) (case field-name ((control-port-over-nl80211?) "ControlPortOverNL80211") ((disable-anqp?) "DisableANQP") ((disable-ocv?) "DisableOCV") ((enable-ipv6?) "EnableIPv6") ((ap-address-pool) "APAddressPool") (else (string-delete char-set:punctuation (string-capitalize (symbol->string field-name)))))) (define (serialize-field field-name val) (format #f "~a = ~a~%" (uglify-field-name field-name) val)) (define serialize-string serialize-field) (define-maybe string) (define (serialize-boolean field-name val) (serialize-field field-name (if val "true" "false"))) (define cidr4? (@@ (gnu services vpn) cidr4?)) (define serialize-cidr4 serialize-field) (define-maybe cidr4) (define (randomization-method? val) (memv val '(#f once network))) (define (serialize-randomization-method field-name val) (serialize-field field-name (or val 'disabled))) (define (randomization-range? val) (memv val '(full nic))) (define serialize-randomization-range serialize-field) (define (signal-strength? val) (and (number? val) (>= val -100) (<= val 1))) (define serialize-signal-strength serialize-field) (define (seconds? val) (and (integer? val) (not (negative? val)))) (define serialize-seconds serialize-field) (define (protection-mode? val) (memv val '(0 1 2))) (define serialize-protection-mode serialize-field) (define (resolution-method? val) (memv val '(#f resolvconf))) (define (serialize-resolution-method field-name val) (serialize-field field-name (or val 'none))) (define serialize-integer serialize-field) (define serialize-number serialize-field) (define (serialize-list-of-strings field-name val) (serialize-field field-name (string-join val ","))) (define-maybe list-of-strings) (define list-of-cidr4? (list-of cidr4?)) (define serialize-list-of-cidr4 serialize-list-of-strings) (define-configuration iwd-configuration (iwd (file-like iwd) "The iwd package to use.") (log-file (string "/var/log/iwd.log") "Log file location.") ;; General (enable-network-configuration? (boolean #f) "Enable network configuration.") (use-default-interface? (boolean #f) "Do not allow iwd to destroy / recreate wireless interfaces at startup, including default interfaces.") (address-randomization (randomization-method #f) "Available values are @code{#f}, @code{once} and @code{network}. @code{#f} for default kernel behavior, @code{once} to randomize the MAC address when iwd starts or the hardware is detected for the first time, @code{network} to randomize the MAC address on each connection to a network (the MAC address is generated based on the SSID and permanent address of the adapter).") (address-randomization-range (randomization-range 'full) "Available values are @code{nic} and @code{full}. @code{nic} to only randomize the NIC specific octets (last 3 ones), @code{full} to randomize all 6 octets of the address.") (roam-threshold (signal-strength -70) "Value in dBm, control how aggressively iwd roams when connected to a 2.4Ghz access point.") (roam-threshold-5g (signal-strength -76) "Value in dBm, control how aggressively iwd roams when connected to a 5Ghz access point.") (roam-retry-interval (seconds 60) "How long to wait before attempting to roam again if the last roam attempt failed, or if the signal of the newly connected BSS is still considered weak.") (management-frame-protection (protection-mode 1) "Available values are @code{0}, @code{1} and @code{2}. @code{0} to completely turn off MFP (even if the hardware is capable), @code{1} to enable MFP if the local hardware and remote AP both support it, @code{2} to always require MFP.") (control-port-over-nl80211? (boolean #t) "Enable sending EAPoL packets over NL80211.") (disable-anqp? (boolean #t) "Disable ANQP queries.") (disable-ocv? (boolean #f) "Disable Operating Channel Validation.") (country maybe-string "ISO Alpha-2 Country Code. Request the country to be set for the system.") ;; Network (enable-ipv6? (boolean #t) "Configure IPv6 addresses and routes.") (name-resolving-service (resolution-method 'resolvconf) "Available values are @code{resolvconf} and @code{#f}. Configure a DNS resolution method used by the system and must be used in conjunction with @code{enable-network-configuration?}. @code{#f} to ignore DNS and domain name information.") (route-priority-offset (integer 300) "Configure a route priority offset used by the system to prioritize the default routes. The route with lower priority offset is preferred.") ;; Blacklist (initial-timeout (seconds 60) "The initial time that a BSS spends on the blacklist.") (multiplier (integer 30) "If the BSS was blacklisted previously and another connection attempt has failed after the initial timeout has expired, then the BSS blacklist time will be extended by a multiple of @code{multiplier} for each unsuccessful attempt up to @code{maximum-timeout} time.") (maximum-timeout (seconds 86400) "Maximum time that a BSS is blacklisted.") ;; Rank (band-modifier-5ghz (number 1.0) "Increase or decrease the preference for 5GHz access points by increasing or decreasing the value of this modifier.") (band-modifier-6ghz (number 1.0) "Increase or decrease the preference for 6GHz access points by increasing or decreasing the value of this modifier.") ;; Scan (disable-periodic-scan? (boolean #f) "Disable periodic scan.") (initial-periodic-scan-interval (seconds 10) "The initial periodic scan interval upon disconnect.") (maximum-periodic-scan-interval (seconds 300) "The maximum periodic scan interval.") (disable-roaming-scan? (boolean #f) "Disable roaming scan.") ;; IPv4 (ap-address-pool (list-of-cidr4 '("192.168.0.0/16")) "Define the space of IPs used for the AP mode subnet addresses and the DHCP server.") ;; DriverQuirks (default-interface maybe-list-of-strings "List of drivers or glob matches. If a driver in use matches one in this list, IWD will not attempt to remove and re-create the default interface.") (force-pae maybe-list-of-strings "List of drivers or glob matches. If a driver in use matches one in this list, @code{control-port-over-nl80211?} will not be used, and PAE will be used instead.") (power-save-disable maybe-list-of-strings "List of drivers or glob matches. If a driver in use matches one in this list, power save will be disabled.")) (define (serialize-iwd-configuration config) (apply mixed-text-file "main.conf" (append-map (match-lambda ((section . fields) (list "[" section "]\n" (serialize-configuration config (filter-configuration-fields iwd-configuration-fields fields))))) `(("General" . ,%iwd-config-general) ("Network" . ,%iwd-config-network) ("Blacklist" . ,%iwd-config-blacklist) ("Rank" . ,%iwd-config-rank) ("Scan" . ,%iwd-config-scan) ("IPv4" . ,%iwd-config-ipv4) ("DriverQuirks" . ,%iwd-config-driver-quirks))))) (define (add-iwd-config-file config) `(("iwd/main.conf" ,(serialize-iwd-configuration config)))) (define add-iwd-package (compose list iwd-configuration-iwd)) (define (iwd-log-rotations config) (list (log-rotation (files (list (iwd-configuration-log-file config)))))) (define (iwd-shepherd-service config) (match-record config (iwd log-file enable-network-configuration? name-resolving-service) (let ((conf (serialize-iwd-configuration config))) (list (shepherd-service (documentation "Run iwd") (provision `(,@(if enable-network-configuration? '(networking) '()) iwd)) (requirement '(user-processes dbus-system)) (start #~(make-forkexec-constructor (list (string-append #$iwd "/libexec/iwd")) #:log-file #$log-file)) (stop #~(make-kill-destructor)) (actions (list (shepherd-configuration-action "/etc/iwd/main.conf")))))))) (define iwd-service-type (service-type (name 'iwd) (extensions (list (service-extension shepherd-root-service-type iwd-shepherd-service) (service-extension dbus-root-service-type add-iwd-package) (service-extension etc-service-type add-iwd-config-file) (service-extension profile-service-type add-iwd-package) (service-extension rottlog-service-type iwd-log-rotations))) (default-value (iwd-configuration)) (description "Run iwd, the iNet wireless daemon."))) ;; ;; Tailscale ;; (define-configuration tailscale-configuration (tailscale (file-like tailscale-bin) "The tailscale package to use.") (iptables (file-like iptables-nft) "The iptables package to use.") (log-file (string "/var/log/tailscaled.log") "Path to log file.") (socket (string "/var/run/tailscale/tailscaled.sock") "Path of the service UNIX socket.") (state-directory (string "/var/lib/tailscale") "Path to directory for storage of config state, TLS certs, temporary incoming Taildrop files, etc. If empty, it's derived from @code{state-file} when possible.") (upload-log? (boolean #f) "Whether to upload logs or not, technical support is also disabled when set to #f.") (verbosity (integer 0) "Log verbosity level; 0 is default, 1 or higher are increasingly verbose.") (extra-options (list-of-strings '()) "List of extra options.") (no-serialization)) (define (tailscale-log-rotations config) (list (log-rotation (files (list (tailscale-configuration-log-file config)))))) (define tailscale-shepherd-service (match-record-lambda (tailscale iptables log-file socket state-directory upload-log? verbosity extra-options) (let ((environment #~(list (string-append "PATH=" (string-join '(#$(file-append iptables "/sbin") #$(file-append iproute "/sbin")) ":"))))) (list (shepherd-service (documentation "Run tailscaled") (provision '(tailscaled)) (requirement '(user-processes)) (start #~(make-forkexec-constructor (list #$(file-append tailscale "/bin/tailscaled") #$@(if upload-log? '() '("-no-logs-no-support")) "-socket" #$socket "-statedir" #$state-directory "-verbose" #$(number->string verbosity) #$@extra-options) #:environment-variables #$environment #:log-file #$log-file)) (stop #~(make-kill-destructor))))))) (define tailscale-service-type (service-type (name 'tailscaled) (extensions (list (service-extension shepherd-root-service-type tailscale-shepherd-service) (service-extension profile-service-type (compose list tailscale-configuration-tailscale)) (service-extension rottlog-service-type tailscale-log-rotations))) (default-value (tailscale-configuration)) (description "Run tailscaled.")))